Amorphous Si Solar cells
Amorphous Photosensors
Amorphous Si Solar cells:
- Overview/Relationship between illumination level and output
- Features/Application Examples/Substrate
- Output Characteristics
- Terminal Configurations
- Amorton Film
- Amorton Products for Clocks
- Display a list:
- Indoors
- Indoors(for high illumination levels)
- Outdoors
Terminal Configurations
Input current is converted to voltage for signal processing. Usually, OP amplifier is used for linear amplification as shown in the circuit diagram (right).
| Indoors | Outdoors | |||
|---|---|---|---|---|
| B type | C type | CS type | CA type | CAR type C type also possible |
| Cannot be soldered. A heat seal is usable. |
Lead wire can be attached with regular solder. | Temporary solder is attached to a C type device. | C type terminal with lead wire. | The pins are protected with a resin coating after the leads are attached |