ASIC: Gate Arrays, Embedded Arrays and Standard Cells

IP

Currently, the inclusion of special functions is indispensable for system engineers to provide unique system characteristics.
SANYO provides an extensive set of special cells and megacells for use in ASIC, from monostable multivibrators, voltage comparators, to RAM and ROM.

Item Applicable ASIC series
0.6µm 0.35µm 0.25µm 0.18µm
G/A E/A, S/C G/A E/A, S/C E/A, S/C E/A, S/C
LC22xxx LC27xxx LC24xxx LC272xx LC273xx LC274xx
LC98300 LC98500 LC98600 LC98700
Memory SRAM(Single Port)
SRAM(Single Port)
ROM
FIFO - -
DRAM - - - - - -
Flash - - - - - -
EPROM - - - - - -
Analog High-speed
A/D converter
(20 MHz and higher)
6bit - -
8bit - -
10bit - - -
High-speed
D/A converter
(20 MHz and higher)
6bit - -
8bit - -
10bit - -  
Low-speed
A/D
converter
8bit - -
10bit - -
14bit (Audio Multi-bit type) - - - -
16bit (Audio Multi-bit type) - - -
Low-speed
D/A
converter
8bit - -
10bit - -
16bit (Audio Multi-bit type) - -
16 to 24bit (Audio ΔΣ type) - -
Audio Codec 14bit ΔΣ type - - -
Operational amplifiers - -
Voltage comparator
Speaker amplifier(150Ω) - - - -
Regulator(Isource=10mA) - - -
Analog switch
Mono stable multivibrator
Reference voltage generator (band gap) - -
Power supply monitor - -
Power-on reset - -
Frequency multiplier PLL circuit - -
High-precision delay line PLL - -
VCO - -
LCD
peripherals
LCD driver (Passive dot matrix display driver) - -
Panel link receiver (LVDS receiver) - - - -
RSDS/Mini-LVDS (LVDS driver) - - - - -
Multi-level power supply driver/amplifier - - - - -
Source driver/amplifier - - -
DC/DC converter - - -
CPU core 65C02S - -
65C816S - -
Z80
8051
8086
80251
ARM core block /ETM - - - -
Interface/
network IP
USB 1.1 Device
USB 1.1 Host
I²C(master mode only)
UART(8250 equivalent)
UART(16550 equivalent)
USART(8251 equivalent)
PCMCIA 2.0 Host
IrDA 1.0
IEEE1284 Host
ATA/ATAPI-6 Host
Ethernet
USB 2.0 Device (LINK)
USB 2.0 Device (PHY) - - - - -
SD
Memory stick
PCI
USB OTG

:Applicable :Under development

To top of page