: PWM Constant-Current Control Stepping Motor Driver

Optimum to motor drive of OA equipment

PWM Constant-Current Control Stepping Motor Driver LV8741V

Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated.
On resistance (upper side : 0.50 ; lower side : 0.50 ; total of upper and lower : 1.00 ; Ta = 25°C, IO = 1.5A)
Excitation mode can be set to 2-phase, 1-2 phase full torque, 1-2 phase or W1-2 phase
Excitation step proceeds only by step signal input
Motor holding current selectable in four steps
IO max = 1.5A
Output-stage push-pull structure enabling high-speed operation
Output short-circuit protection circuit (selectable from latch-type or auto reset-type) incorporated
Thermal shutdown circuit and power supply monitor circuit incorporated
Supports control power supply VCC = 3.3V

You can see an enlarged image when I click it.