SANYO Semiconductor HOME > Product Information > Applications > Cell Phones: Portable Electronic Devices > IO expander ICs
Applications
It is possible to receive commands from the host CPU
and switch input/output for every GPIO pin.
Features
- Resistor setting can switch GPIO input/output, set pull up/pull down/disable
- Resistor setting can switch the GIO output voltage from/to 2.6V to/from 1.8V, set level shifter function and polarity of the interrupt signal INTR
- RC oscillation circuit mounted. Frequencies is variable through externally changing RC values.
- For interrupt detection mode, edge (start up/shut down), level(HI/LOW) selection is possible
- HOST I/F CPUIF is 2 wire serial I/F
GPO Lineup
| Type no. | Port | Package | Sample | Comment | ||
|---|---|---|---|---|---|---|
| PKG | Size (mm) | ES | MP | |||
| LC98600CLT-07T | 20 | FLGA32J | 3.5×3.5×0.56 | Available | Available | Switch 2 power supply |
| LC98600CLT-07TA | 8 | FLGA32J | 3.5×3.5×0.56 | Available | Available | Switch 2 power supply |
Block Diagram
